Micronics PCI/ISA System Board D6-IN Uživatelský manuál stáhnout pdf (Strana 28)

D6-IN System Board Manual

Chapter 4: The BIOS Setup Utility

After the system is turned on and goes through a memory

test, the Power-Up screen (Figure 4-1) will appear on

your monitor:

Figure 4-1: Power-Up Screen

When “Press <F2> to enter SETUP” appears at the

bottom of the screen, press the <F2> key to begin the

Setup procedure. The CMOS Main Screen (Figure 4-2)

should appear and the prompt should be on the time

line. The Setup procedure can only be activated during

the boot sequence.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 70 71

Žádné komentáře

Micronics PCI/ISA System Board D6-IN Uživatelský manuál Strana 28