Micronics PCI/ISA System Board D6-IN Uživatelský manuál stáhnout pdf (Strana 11)

2-1

Jumper Settings

Configuring the M6Pi

Although the M6Pi system board is packaged in protective

materials, it is important to use care while unpacking and setting up.

Static Electricity

The M6Pi is shipped from the factory in an antistatic bag. To reduce the

possibility of damage, it is important to neutralize any accumulated

static charges on your body before handling the board. The best way to

neutralize these static charges is to ground yourself using a special wrist

or ankle strap. If you do not have a strap, you should touch both of your

hands to a safely grounded object. After you have grounded yourself,

ground the M6Pi via the solder pads surrounding one of its mounting

holes.

Once the M6Pi is removed from its packaging, place it on top of the

antistatic bag. Carefully inspect the board for damage which may have

occurred during shipment.

Office Environment

Make sure the finished computer system is in an area with good ventila-

tion. The system should not be in direct sunlight, near heaters, or

exposed to moisture, dust, or dirt.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 50 51

Žádné komentáře

Micronics PCI/ISA System Board D6-IN Uživatelský manuál Strana 11